Voditec P-40

Bituminous adhesive containing solvent for the cold adhesion of insulating panels

Features

VODITEC P-40 is a ready to use, thixotropic, bituminous adhesive paste with a low content of solvents ideal for the cold adhesion of insulating panels. The solvents and resins contained in VODITEC P-40 makes the application on polystyrene and polyurethane panels possible without melting when using the cold applied technique.

 

Primary use

VODITEC P-40 has been studied and formulated for the cold adhesion of every type of insulating panel and sound absorbent. It can be applied on horizontal and vertical surfaces thanks to its high thixotropy and can also be applied both onto humid or wet surfaces. VODITEC P-40 is a excellent, cost effective alternative to warm bitumen.

 

Instructions for use

Apply VODITEC P-40 with a spatula in 10 cm wide strips at maximum 15cm centres. VODITEC P-40 can also be applied onto surfaces where adhesion is required in different points, applying pressure on the panel and avoiding thicknesses higher than 2/2.5 mm. The surfaces must be clean before application, ensuring that there are no dust, oils or other deleterious materials on the surface. To improve the adhesion of VODITEC P-40 on humid surfaces wipe the product with a spatula on the panel to be applied.

 

Technical specifications
Colours Black
Drying On the surface 60 min at 5° C under surface membrane 72/96 hours at 5° C
Dry residue 85%
Inflammability Flammability risk at over 65°C
Consumption 150/300 gr. for m² according to the texture of the surface
Specific gravity 1433 g/Lt +/- 3%
Packaging Plastic drums of 5 - 10 - 20 Kg and cartridges of 310 ml
Storage Store in the original containers, for up to 18 months from the production date

 

Precautions

VODITEC P-40 is produced in two versions: the summer grade product and winter grade product ,for temperatures under 5° C. Using VODITEC P-40 panel adhesion is immediate. Drying time depends on the temperature, air humidity and the level of surface permeability.
The panels should be ballasted if strong winds are expected.

Download PDF version

Solution Finder Follow these three simple steps to find the best solutions for your needs.
1
2
 
VODICHEM UK - liquid waterproofing membrane manufacturersVODICHEM UK
Unit 32 HOBBS Industrial Estate, Lingfield, Surrey RH7 6HN
Tel - 01342 833 917 | Fax - 01342 821 671
General Enquiries - 0845 834 0991
email - info@vodichem.com